 |
Code |
nominal size |
WLL |
MPF |
BF |
weight |
ident no. |
mm |
t |
kN |
kN |
kg / m |
ENORM 10K |
6 × 18 |
1,4 |
35,3 |
56,5 |
0,8 |
0310206003 |
ENORM 10K |
8 × 24 |
2,5 |
62,8 |
101 |
1,5 |
0310208003 |
ENORM 10K |
10 × 30 |
4,0 |
98,1 |
157 |
2,3 |
0310210003 |
ENORM 10K |
13 × 39 |
6,7 |
166 |
265 |
3,9 |
0310213003 |
ENORM 10K |
16 × 48 |
10,0 |
251 |
402 |
5,8 |
0310216003 |
ENORM 10K |
18 × 54 |
12,5 |
318 |
509 |
7,4 |
0310218003 |
ENORM 10K |
22 × 66 |
19,0 |
475 |
760 |
11,0 |
0310222003 |
ENORM 10K |
26 × 78 |
26,5 |
664 |
1060 |
15,9 |
0310226003 |
Allowed working load limits according to EN 818-6 for different chain temperature
- 40°C bis | to 200°C 100 %
200°C bis | to 300°C 90 %
300°C bis | to 400°C 75 %
Once the ENORM - chain has cooled down to room temperature it can be again used at 100 %.
The ENORM chain corresponds in its dimensions the requirements of the EN 818-2.
 |
The working load limits are 25 % higher than the values for grade 8 requires as per EN 818-2 however the diameter remaines the same.
|
|
|
The minimum elongation at fracture is 25 % (natural black) and 20 % colour coated and this with at the same time increased strength. |
|
|
The nominal strength of 1000 N / mm2 corrensponds to grade 10 EN 818-1. |
|
|
The surface of all ENORM products is powder coated turquoise. » Additionally JDT proposes COR 92 as a corrosion protection for the ENORM round link chain. Here the thermally applied organic coating is used. |
|
